Switching The Traffic Assist Pro On/Off; Switching On; Switching Off - Becker TRAFFIC ASSIST PRO Operating Instructions Manual

General operations
Note:
The TMC only functions
combination with a power supply from
the TMC receiver.
Switching the Traffic Assist Pro
on/off
The unit is switched on and off using the
back key.
5014
22

Switching on

Press the BACK button.
!
in
The unit is switched on. The following
prompt appears on the touch screen:
Comply with highway code
The following question appears shortly
thereafter: Comply with highway code
5002
If you agree with this request, press
!
the OK key.
Note:
The Traffic Assists may only be used in
accordance with the applicable national
road traffic act!

Switching off

You can switch the unit off at any time.
If necessary, new destinations should
first be saved.
! Press the back key for a few seconds.
The unit switches off.
! Switch the On/Off switch to Off for fi-
nal deactivation of the unit.