Service Information; Factory Settings; Calibration (Model Dependent) - Becker GPS Navigator Operating Manual

>>> SETTINGS

Service information

The following
information regarding the Navigation
device.
Information
> Press the
The information display appears with the
software version number.
By pressing the
ton, you can display further information
such as used licences, installed contents
and map material. Always quote these
details in enquiries to the service provid-
ed by United Navigation GmbH.
136

Factory settings

button displays You can reset your Navigation device to
the factory settings.
The following updated data is deleted:
saved destinations, saved routes, the
home address, telephone data, images,
button. videos etc. saved on the internal memory.
> Press the
Service information
but-
> Press the
The Navigation device is reset to the
factory settings.
Factory reset button.
Yes
button.

Calibration (model dependent)

If the touch screen responds incorrectly
when buttons are pressed, it needs to be
calibrated.
Starting the calibration
You can start the calibration using the
following button:
> Press the Calibration button.
The calibration procedure will be started.
You will be guided through the procedure
by means of text instructions.