Integrated Lights-Out Technology; Integrated Lights-Out Rom-Based Setup Utility - HP ProLiant DL585 User Manual

Integrated Lights-Out technology

Integrated Lights-Out (iLO) is a standard component of selected ProLiant servers that
provides server health and remote server manageability. The iLO subsystem includes
an intelligent microprocessor, secure memory, and a dedicated network interface.
This design makes iLO independent of the host server and its operating system. The
iLO subsystem provides remote access to any authorized network client, sends alerts,
and provides other server management functions.
Using iLO, you can:
•
Remotely power up, power down, or reboot the host server
•
Send alerts from iLO, regardless of the state of the host server
•
Access advanced troubleshooting features through the iLO interface
•
Diagnose iLO using HP Systems Insight Manager (HP SIM) through a Web
browser and SNMP alerting
For more information about iLO features, refer to the Integrated Lights-Out User
Guide on the Documentation CD or on the HP website at
http://www.hp.com/servers/lights-out

Integrated Lights-Out ROM-Based Setup Utility

HP recommends using iLO RBSU to configure and set up iLO. iLO RBSU is
designed to assist you with setting up iLO on a network; it is not intended for
continued administration.
To run iLO RBSU:
1. Restart or power up the server.
2. Press the F8 key when prompted during POST. The iLO RBSU runs.
3. Select Administer User Accounts>Configure iLO Settings. Enter a valid iLO
user ID and password with the appropriate iLO privileges Default account
information is located on the iLO Default Network Settings tag.
4. Make and save any necessary changes to the iLO configuration.
HP ProLiant DL585 Server User Guide
Server Configuration and Utilities
.
5-11