Barco Nio MKII Installation & User Manual page 48

Installing the Nio drivers and software
or
Browse to the root directory of the B
a)
Installation CD-ROM and double click on the file,
"Setup.exe".
Click "Next" on the Welcome page.
4.
Click "Next" on the Components to be installed page.
5.
Follow the wizard's on-screen instructions to complete the
6.
installation.
When the wizard page shown in figure 20 appears you may
Note:
either click "Next" to accept the default settings or if you know
the settings required for your viewing application, you may select
them now and then click "Next". You may change these settings
later by using the Barco pages of the Windows Display Control
Panel.
Please refer to your application manuals for information on the
correct Palette and Drawing modes to select.
When the driver setup is complete, click the Finish button.
7.
The Barco Product Installation Wizard will now guide you through
the installation of NioWatch and BarcoMed SelfExam.
48
ARCO
Figure 20
N Display System
IO
Nio MKII