Barco Nio MKII Installation & User Manual page 66

BarcoMed Hardware Tab
Customer Diagnostic Questions Screen
This screen allows the user to tell the Barco ImageCare team as much as
possible about the problem. For the Medical Viewing Applications
Running field, enter the medical applications that are currently running
on the system with the problem. For the "Any Applications using DIMPL"
question, select the "radio button" that applies to the correct response.
For the "Detailed Description" field, enter a detailed description of
the problem. And, for the Additional Notes field, enter any information
that could help the Barco ImageCare team diagnose the problem.
Gathering Diagnostic Data Screen
Important: When performing the Graphics Operations, you must
drag the "Gathering Diagnostic Data Screen" onto the display for
which you want the Graphics Operations data.
This screen gathers the diagnostic data from the user's system as
described above in this document. Click the "Start Diagnostic"
button to begin the diagnostic gathering process.
To perform the graphics operations test, check the graphics operations
checkbox. During the graphics operations test, several things will
happen to the screen. Each graphics operation is performed for 10
seconds. To quit the graphics operations test at any time, press the
Escape button.
To create a summary report for QA purposes, check the summary report
checkbox. If this box is checked, an additional report will be saved on
the desktop called BarcoExamSummary.txt.
Please let the wizard gather all of the data, the "NEXT" button will be
enabled only after all of the information is gathered. Once the
information is gathered, the user may not go back in the wizard
screens.
Completion Screen
The BarcoMed Self Exam has collected all of the information. A report
called BarcoSelfExam.html with all of the diagnostic data that was
66 Nio MKII