Barco Nio MKII Installation & User Manual page 111

Driver re-installation, updates or removal
start within one minute, browse the contents of your Nio Software
CD and double click on the file: "Setup.exe" to start the wizard.
The BarcoMed Product Installation Wizard will display its welcome
2.
screen.
Make certain that the checkbox next to the driver is checked and
3.
that all other checkboxes are unchecked (figure 46 below). Click
"Install" to continue.
Click "Next".
4.
On the next screen (see figure 47 on page 112), check the
5.
checkbox next to "Uninstall this device" and click "Next" to
continue.
Nio MKII
Figure 46
111