Barco Nio MKII Installation & User Manual page 64

BarcoMed Hardware Tab
Subsystem ID: Displays the device's PCI Subsystem ID number.
SubsystemVendorID: Displays the device's PCI Subsystem Vendor ID
number.
VGA Status: Displays whether the VGA capabilities of the BarcoMed
controller are enabled or disabled.
Firmware Information
Product Name: Displays the name of the BarcoMed display controller
installed in the selected PCI slot.
Serial Number: Displays the serial number of the BarcoMed display
controller installed in the selected PCI slot.
VGA Bios Version: Displays the VGA Bios version for the BarcoMed
display controller installed in the selected PCI slot.
Firmware Version: Displays the firmware version for the BarcoMed
display controller installed in the selected PCI slot.
Hardware Version: Displays the Hardware Version for the BarcoMed
display controller installed in the selected PCI slot.
"Advanced ..." Button: By clicking on this button, the user can display
more information about the BarcoMed display controller installed in the
selected PCI slot.
Utilities
"Generate Report" Button:
Clicking this button will launch the BarcoMed Self Exam utility. BarcoMed
Self Exam is an automated Barco Diagnostic Tool that is used to gather
the information that support engineers and technicians need to help
determine the root cause of a customer problem. It probes the system
for various types of system information, and saves it to a web-page
report that can then be analyzed by the Barco ImageCare team.
BarcoMed Self Exam is implemented in a Wizard Format. The BarcoMed
Self Exam Wizard will first ask the user to provide detailed customer
contact information. After completion of the customer contact
64 Nio MKII