Barco Nio MKII Installation & User Manual page 119

Technical specifications
Luminance
Contrast ratio
Response time
Controls
Input connectors
Signal systems
USB standard supported
Power source
Power consumption
Dimensions (W x H x D)
Net weight
Operating Temperature
Storage Temperature
Humidity
Nio MKII
Item Specification
500 cd/m² (calibrated)
900/1 (on/off in dark environment)
25 ms typical (@ 25° C after 30 min
warm-up)
Push / turn control wheel for stand-by
switching and OSD controls
DVI dual channel
Video on DVI: Complying to DVI Rev 1.0
specifications
Sync on DVI: Complying to DVI Rev 1.0
specifications
USB 1.1
Input for 12 VDC power supply unit:
90 ~ 264 VAC
Input for display: 12 VDC. (The supplied
12VDC power supply must be used)
79 watts (max., at 90 VAC, maximum
backlight, USB load)
In perpendicular vertical position,
highest position, tilt = 0°, swivel = 0°:
385 x 585 x 250 mm
13 kg
0°C to 40°C, 15°C to 35°C within specs
-20°C to 60°C
8% - 80% (non-condensing) for
operation
5% - 95% (non-condensing) for storage
119