Avocent DSView 3 Installer/User Manual page 205

6. Click Save and then click Close.
User group membership
See User Groups on page 190.
To change the group membership of a user:
1. Click the Users tab.
2. Click on a username. The User Name window will open.
3. Click User Groups in the side navigation bar. The User Group Membership window will open.
4. To add a user to one or more groups, select the group(s) in the Available Groups list, then click
Add. The columns will be moved to the Member Of list.
5. To remove the user from one or more groups, select the group(s) in the Member Of list, then
click Remove. The groups will be moved to the Available Groups list.
6. Click Save and then click Close.
The DSView 3 software obtains external group membership and external user information when a
user logs in. If a user's group membership changes or the user is deleted externally, the DSView 3
software will not see those changes until the next time that user logs in.
Preemption level
See Preemption Levels on page 21.
To change the preemption level of a user:
1. Click the Users tab.
2. Click on a username. The User Name window will open.
3. Click Preemption Levels in the side navigation bar. The User Preemption Level window
will open.
4. Select a preemption level (1-4) from the menu.
5. Click Save and then click Close.
Address
The user address may be changed only for internal authentication users.
To specify address information for a user:
1. Click the Users tab.
2. Click on a username. The User Name window will open.
3. Click Addresses in the side navigation bar. The User Address Properties window will open.
4. Type the home address and business address of the user.
5. Click Save and then click Close.
Chapter 5: Managing User Accounts 187