Using The Dsr Remote Operations Software - Avocent DSView 3 Installer/User Manual

322 DSView 3 Software Installer/User Guide
• If you do not accept the terms, click I do NOT accept the terms of the License Agreement.
A License Agreement Warning message box will appear.
• If you click Quit, the installation will exit without installing the DSR Remote Operations
software.
• If you click Resume, you will be returned to the License Agreement window.
7. The Choose Destination Location window will open.
a. Click Choose and use the Browse for Folder dialog box to select a directory in which to
install the DSR Remote Operations software.
-or-
Click Restore Default Folder to restore the installation directory to the default
(C:\Program Files\Avocent DSView 3\DSR Remote Operations).
b. Click Next.
8. The Installing... window will open and displays the progress of the installation. The software
will be installed in the specified folder and a Start - Programs - Avocent DSView 3 - DSR
Remote Operations shortcut menu will be created.
If a previous version of the DSR Remote Operations software already exists on the Client
computer, message boxes may appear asking if you want to overwrite existing files. Click Yes
to All.
9. When the software has finished installing, the DSR Remote Operations Installation window
will open.
a. To start the DSR Remote Operations, select Click here to invoke the DSR Remote
Operations application.
b. Click Done when you are finished.

Using the DSR Remote Operations software

To start the DSR Remote Operations software:
1. Establish a dial-up connection to the switch from the PC containing the DSR remote
operations software.
Windows displays a dialog box that prompts the user for a username and password when a
dial-up connection is established. It is not necessary to enter a username or password in the
dialog box. When this dialog box appears, click OK to close the dialog box.
2. Once the connection has been established, select Start - Programs - Avocent DSView 3 - DSR
Remote Operations to start the DSR Remote Operations software on the PC. The Login dialog
box will appear. Log in using a valid username and password to establish a DSR Remote Oper-
ations software session with the DSR switch over the modem link
The switch will disconnect the modem connection if a user does not log in within the time
period specified by the authentication time-out value. The default authentication time-out
value (120 seconds) may be changed using the Terminal Applications menu. See the installer/
user guide for the DSR switch for more information.