Avocent DSView 3 Installer/User Manual page 137

3. Click Save and then click Close. The Units View window will open.
To change the network properties for a managed appliance:
NOTE: This procedure is valid for the following managed appliances: DS1800 switches, DSI5100 appliances,
CPS appliances, CCM appliances and DSR switches.
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88) click on the appliance name.
2. Click Properties in the side navigation bar and then click Network in the side navigation bar.
The Unit Network Properties window will open.
• Type the address or the fully qualified domain name.
If you are changing the appliance IP address, you should first change it in the Appliance
Network Settings window before changing it in the Unit Network Properties window. See
Managed Appliance Network, Authentication Server and Version Settings on page 122.
• Select the DSView 3 software server in charge of the managed appliance.
3. Click Save and then click Close. The Units View window will open.
To change the DSView 3 software server network property for one or more units
from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 88), click the checkbox
next to the unit(s). To change the DSView 3 software server property for all units in the page,
click the checkbox to the left of Name at the top of the list. (If the page contains units that do
not support note properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Network.
4. Select the DSView 3 software server in charge of the units.
5. Click Save and then click Close. The Units View window will open.
To change the network properties for an EVR1500 environmental monitor or
generic appliance:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name.
2. Click Properties in the side navigation bar and then click Network in the side navigation bar.
The Unit Network Properties window will open.
• Type the address or the fully qualified domain name.
• Type a Telnet port number.
• Type a web browser address.
• Select the DSView 3 software server in charge of the EVR1500 environmental monitor or
generic appliance.
3. Click Save and then click Close. The Units View window will open.
Chapter 4: Managing Units 119