Avocent DSView 3 Installer/User Manual page 135

To change the location properties for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 88), click the checkbox
next to the unit(s). To change location properties for all units in the page, click the checkbox to
the left of Name at the top of the list. (If the page contains units that do not support location
properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Location.
4. Type or use the menus to specify the site, department and/or location for the units.
5. Click Save and then click Close. The Units View window will open.
To change the contact properties for a unit:
1. In a Units View window (see Accessing Units View windows on page 88), click on the
appliance or target device name.
2. Click Properties in the side navigation bar and then click Contacts in the side navigation bar.
The Unit Contacts window will open. Type the names and phone numbers of the primary and
secondary contacts.
3. Click Save and then click Close. The Units View window will open.
To change the contact properties for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 88), click the checkbox
next to the unit(s). To change contact properties for all units in the page, click the checkbox to
the left of Name at the top of the list. (If the page contains units that do not support contact
properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open.
• To change the primary contact information, click Primary Contact. Type names and
phone numbers for the primary contact.
• To change the secondary contact information, click Secondary Contact. Type names and
phone numbers for the secondary contact.
4. Click Save and then click Close. The Units View window will open.
To change the custom fields for a unit:
1. In a Units View window (see Accessing Units View windows on page 88), click on the
appliance or target device name.
2. Click Properties in the side navigation bar, then click Custom Fields in the side navigation bar.
The Unit Custom Fields window will open. To change information, type the information in
each of the three custom fields.
3. Click Save and then click Close. The Units View window will open.
Chapter 4: Managing Units 117