Avocent DSView 3 Installer/User Manual page 117

To add a single embedded appliance:
1. In a Units View window containing managed appliances (see Accessing Units View windows
on page 88), click Add. The Add Appliance Wizard will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Add a single appliance, then
click Next.
3. If you were not in an appliance type Units View window when you clicked Add in the first
step, the Select Appliance Type window will open. Select an embedded appliance from the
product list, then click Next.
• For an IBM ASM RSA II embedded appliance, go to step 4.
• For a DRAC 4 embedded appliance, go to step 5.
• For an HP iLO embedded appliance, go to step 6.
• For an NEC IPF embedded appliance, go to step 7.
4. For IBM ASM RSA II embedded appliances:
a. The Configure IBM ASM RSA II Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
e. In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
f. Click Next.
g. The embedded device discovery will verify that a web server exists at the specified IP
address. If successful, the Select Option window will open.
h. Enable or disable the Allow target devices with the same name to be merged into a single
target device checkbox.
i. Click Next. Go to step 8.
5. For DRAC 4 embedded appliances:
a. The Configure DELL DRAC4 Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Port field, type a TCP port number in the range 0-65535 where the appliance
will listen.
Chapter 4: Managing Units 99