Table 11.1: Plug-Ins Display Information - Avocent DSView 3 Installer/User Manual

The DSView Servers table lists the status of the plug-in on each DSView 3 software server.
Each row includes the name of the server and the plug-in version plus the administrative and
operational status of the plug-in on that server.
Table 11.1 describes the fields in the these windows

Table 11.1: Plug-ins Display Information

Field
Name
Version
Overall Status
Administrative Status
Operational Status
Detailed Operational
Status *
Description *
Description
Plug-in name, acquired from the plug-in.
Plug-in version (on this server), acquired from the plug-in when it was added
or upgraded.
• Same - The plug-in's operational status, administrative status and version is the
same on all DSView 3 software servers.
• Mixed - The plus-in's operational status, administrative status and version is
not the same on all DSView 3 software servers.
Administrative status on this server. Valid values are::
• DSView server not responding - (This value is valid only when a single plug-in
has been selected.) The DSView 3 software could not obtain plug-in status on
this server.
To examine server status, click the System tab, then DSView Server in the top
navigation bar. If you are on a hub server, click Spoke Servers in the side
navigation bar and then select the appropriate server. If you are on a spoke
server, click Hub Server in the side navigation bar.
• Replication needed - The plug-in has been added, but replication is required
before the plug-in can be used.
• Active - The plug-in is registered and operational.
• Disabled - The plug-in has been disabled.
• Not installed - The plug-in has not been added to this server. If the DSView 3
software can obtain information from the status service about this plug-in (from
other servers where it is installed), the Name field will contain the plug-in's
name. If the status service does not provide this information, the Name field will
contain the plug-in's domain and ID.
Operational status on this server. Valid values are:
• Inactive - The plug-in is not running.
• Active - The plug-in is running.
• Initializing - The plug-in is starting up.
• Shutting down - The plug-in is stopping.
• Upgrading - The plug-in is in the upgrade process.
Detailed status acquired from the plug-in.
Descriptive information acquired from the plug-in.
Chapter 11: Plug-ins 305