Product Description; Operating Parts Ap 4.4 / Ap 5.4 Basic - Avery Dennison AP 4.4 User Manual

05/04 Rev. 1.2-03

Product Description

Control panel
LCD graphics display, 4 buttons;
displays printer operating status,
enables parameter menu
settings.
Connection for additional
devices
Connection for optional
cutter or take-up.
(Not available at AP 4.4 and
AP 5.4 basic)
Foil unwinding roll mandrel
Holds the new foil roll.
Foil take-up roll mandrel
Holds the backing paper onto
which used foils are wound.
Flange mount for additional
devices
Cutter and take-up can alternately be
screwed on here. To do this, you will
need to remove the plastic cover.
Pressure lever
Opening the pressure lever raises the
printhead. This is required when inser-
ting the material or foil or to clean the
printhead or printing roller.
USER MANUAL
AP4.4 – AP5.4

Operating Parts AP 4.4 / AP 5.4 basic

Fig. 8: Exterior view of the AP 5.4.
Fig. 9: AP 5.4 operating parts.
Front cover
Open to insert material
and foil.
Window
Allows material/foil supply
check without opening the
front hood.
Material rewinder
Labelling material roller inserted
here.
Material strain relief
Ensures even feed of the label-
ling material.
Guide plate
Prevents the material roll from
slipping sideways.
Adapter rings
To set the unwinder to the core
diameter of the material roll.
6
Setup & Operation