Table of Contents
Advertisement
7 and Chapter 4 about ATBn setup.
We recommend you change the package size in B channel to improve reliability and
performance. Set packet size to 512 bytes using " ATS39 = 512" in Extra Setting field or
input the value manually. For example, to select a X.75 Transparent with 1024 packet
size for B channel connection use, ATB30S45=1024.
* Note: the setting values for B channel protocol, packet size, or Window size
will be reset to default value when finish the application. If you would like to
make these changes permanent then enter the settings in the Extra settings
field as shown above.
RVS-COM
The ISDN CAPI (ISDN T/A 128 driver) have to be installed first - before installing RVS-
COM. Here's how you install RVS-COM on your computer:
Place the RVS-COM CD in your CD drive.
1.
If the Setup program doesn't start by itself: In the taskbar select Start: Run. Enter
2.
D:\SETUP (substitute the appropriate drive letter for your CD drive, if necessary).
Click on OK.
You will be asked to type in the key for your copy of RVS-COM. Depending on the
3.
version of the program, you will find this information on a separate card or on the
back of the CD case.
The Setup program will now start. Please follow the instructions on the screen.
4.
Depending on the version, you may also have received a Service Pack with your
5.
RVS-COM CD which takes into account the most current changes in the program.
Please insert the diskette into the drive when you are prompted to do so.
Restart your computer if the program requests you to do so.
6.
The Installation Wizard will then start automatically and will help you to configure
7.
RVS-COM. The Wizard will prompt you for all relevant settings.
After installation, the RVS-COM programs will be located in the list of programs
8.
named RVS-COM. You reach this by clicking on Start in the taskbar and then
selecting Programs.
Open the online documentation to quickly familiarize yourself with RVS-COM.
PC Anywhere
53
Advertisement
Table of Contents
