Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Planet 2 Bay SATA NAS RAID Server NAS-7201
Summary of Contents for Planet 2 Bay SATA NAS RAID Server NAS-7201
- Page 1 2 Bay SATA NAS RAID Server NAS-7201 Quick Installation Guide Version 1.0...
-
Page 2: Table Of Contents
Table of Contents 1. OVERVIEW... 3 2. PACKAGE CONTENTS... 3 3. HARDWARE INSTALLATION... 4 4. HARDWARE CONNECTION ... 8 5. BASIC CONFIGURATION... 9 5.1. W EB CONFIGURATION ACCESS 5.2. HDD F ORMATION AND FURTHER INFORMATION... 10 ... 9 RAID S ... -
Page 3: Overview
1. Overview Thank you for purchasing NAS-7201, the 2-bay SATA RAID NAS server, this guide provides physical installation and initial HDD configuration for the this NAS RAID Server. Please read the information before your installation. 2. Package Contents NAS-7201 Power adapter Quick Installation Guide User’s Manual CD RJ-45 cable... -
Page 4: Hardware Installation
3. Hardware Installation Step 1: Remove the Front Case Follow the figure below to release the screws and open the front case with the direction. Slightly push the front case and lift up the plastic case. Note When lift up the front case, please be careful for the LED wire that connect to the front panel LED Step 2: Pull out the side case Also pull out the side case to locate the HDD mounting screws. - Page 5 Step 3: Slide in the HDDs Gently slide in the SATA HDD one by one as the figure. When HDD touch the SATA connector, slightly push the HDD to make it well connected to the SATA interface of the RAID Server Caution Before slide in the HDD, please do make sure the HDD is in the correct direction.
- Page 6 Step 4. Lock the HDD To lock the HDD through two screws so that the HDD can well connected to the NAS server. Step 5 Slide back the side case After the HDD is installed, lock the HDD with screws and slide back the case.
- Page 7 Step 6 Lock the front case Follow the figure below to put back the front case. Be careful for the LED wires. Please align the LED wires to the space between the two HDD and close the case gentley then push with the direction Pull the case back and follow the arrow direction to push the front case.
-
Page 8: Hardware Connection
4. Hardware Connection Steps Description Connect NAS-7201 and a Switch, Hub, Router, or computer with RJ-45 Ethernet cable. Connect USB printer(s) or USB storage device(s) to this device with USB cable(s). NAS-7201 can automatically mount the USB devices connected. Connect the power supply to NAS-7201. Press the “Power button”... -
Page 9: Basic Configuration
5. Basic Configuration 5.1. Web configuration access The NAS-7201 provides GUI (Web based, Graphical User Interface) for management and ad- ministration. The default IP address of NAS server is 192.168.0.100. You may now open your web browser, and insert http://192.168.0.100 in the address bar of your web browser to login web configuration page. The NAS server will prompt for login username / password please enter: admin / admin to con- tinue the NAS Server administration. -
Page 10: Hdd Formation And Raid Setting
5.2. HDD Formation and RAID Setting For new attached hard disk, you should format the HDD before any setting. 1. Go to『Maintenance』 『RAID Setting』to configure the server RAID level and File system. 2. Please press the Create raid system button to make configuration after modified whole con- figurations, then it will be automatically reboot.
Need help?
Do you have a question about the 2 Bay SATA NAS RAID Server NAS-7201 and is the answer not in the manual?
Questions and answers