Table of Contents
Advertisement
Appendix B EC-Type Examination and FCC Regulation
ISDN T/A 128 ST models (IA128-ST, IA128P-ST) available within the EC countries are
passed the necessary EMC & LVD tests and are fully Euro-ISDN (EC) and German BZT
approved. Depends on the exact model name, it may also approved in Slovenia and
other European countries. The EC Registered Certificate numbers for ISA ST (IA128-
ST) models are as follows, the EC certificate number will be changed when the next
generation model unveiled.
CTR 3 standard, therefore the German BZT is not necessary for sell in Germany.
Model number
IA128-ST-D
IA128-ST-DV
IA128P-ST-D
Both ISDN T/A 128 U models (IA128-U-D and IA128-U-DV) have passed FCC rules.
The FCC Part 15 ID and Part 68 registration numbers as follows.
Model number
IA128-U-D
IA128-U-DV
Operation is subject to the following two conditions:
This device may not cause harmful interference.
1.
This device must accept any interference received including interference that may
2.
cause undesired operation.
ETS 300 047 Requirements
To comply with NET3/ETS 300 047 safety requirements covering basic rate access
ISDN equipment intended for installtion in a PC system the following restrictions apply:
The ISDN cord(s) must remain disconnected from the telecommunications system until
the card has been installed within the PC and the PC cover replaced.
If it is subsequently desired to open the PC equipment for any reason, the ISDN cord(s)
must be disconnected prior to effecting access to the ISDN communications card.
The power requirement for the ISDN T/A 128 ST adapter are:
The PCI adapter (eg. IA128P-ST-D) tested with the latest
CE
9741780-01
607410
KCS/98211169/AA/00
Part 15 ID
M2G100-I-UDD
M2G100-I-UDV
BZT
D131717J
D132608J
Not required
Part 68 REG. NO.
5ZDtaI-24422-DE-N
5ZDtaI-24419-DE-N
48
Advertisement
Table of Contents
