Table of Contents
Advertisement
2. Connection through the Virtual Modem
After the successful installation of the Win95 drivers, two extra of virtual ISDN COM
ports will be automatically created. You need check the virtual COM port value, add
the modem (virtual) connection with the ISDN COM port, and check the virtual
modem parameter's value. You can refer the Chapter 4 about AT Command Sets
descriptions.
a.
Check the virtual COM port value.
ISDN COM port Configuration dialog box. If there is any parameter which does
not match with our suggested value, then please alter it accordingly. Even you
choose " 115200" at the " Bits per second" field, the actual physical connection
speed is " 128000" when connection with 128K connection (MLP).
Our recommended values as follows.
Bits per second: 115200
Data bits:
Parity:
Stop bits:
Flow control:
FIFO control:
c.
Select the Start
Ports (COM & LPT),
Settings to check the
e.
Planet
8
None
1
None
None (fill at Advanced tab)
à
à
Settings
Control Panel
ISDN ComPort1 / ISDN
ISDN COM1 / ISDN COM2
Please refer figure 3-8 for details of the
à
System
Comport2, Properties
port parameters.
18
à
Device Manager
à
à
Port
Advertisement
Table of Contents
