Table of Contents
Advertisement
128 WDM driver also supports the multi-ISDN T/A 128 adapters in one PC system.
Installing and Configuring the Drivers
After you have inserted the ISDN device, switch computer power on and allow Windows
2000 to startup. When the Windows 2000 system starts that it should auto-detect a new
PnP card and requests you to install its driver.
Planet
Please click " Next" , check " Search for a suitable driver for your device" and " Next" .
Then insert ISDN 128K driver diskette/CD into appropriate disk drive, Windows 2000 will
run the ISDNLINK.INF file from the installation diskette/CD, or you may specify the
subdirectory which contains the ISDN Windows 2000 device driver. Then Windows
2000 system will automatically process the necessary installation steps.
After
installation, you can use the ISDN driver immediately without reboot system.
You may run the LINKSTS.EXE program which provides the ISDN monitor (log), ISDN
line test tool and driver configuration functions and it will become an icon and appear
in the system tray. When the cursor points to this icon, it will show application name,
driver version number, and the monitored ISDN card name. Move the cursor to this icon
and click the right button, you have 4 items in selection list, Configuration, Linetest, Log
(ISDN monitor), and Exit. The detailed description is the same as in about WDM of
"Installation for Windows 98 Environment" section. Please refer it for more
information.
Application environment setup
Network and Dial-up Connections
38
Advertisement
Table of Contents
