Table of Contents
Advertisement
Figure 3-7 example of Server Types and TCP/IP Settings
Configure the NDISWAN adapter
There are four parameters need to be configured. Please refer the below figure by
clicking Start à Settings à Control Panel à System à Device Manager à Network
Adapters à ISDN adapter, Properties.
The MSN1 and MSN2
port1 (ex. IINWan95-Line01) and ISDN port2 (ex. IINWan95-Line02). For example,
if you want ISDN port 1 to receive telephone number 12345 only, you can enter
12345 into MSN1. The subaddress works like an extension number that your local
ISDN switch must provide this feature also. Usually, leave these fields with blank.
The Calling Party 1 and Calling Party 2
that this call is made from this telephone number and bills the communication cost
based on this telephone number. Be noticed that MSN1 and Calling Party 1 are
reserved by ISDN port1, the MSN2 and Calling Party 2 are reserved by ISDN port2.
are used for filtering the incoming call in separated ISDN
are used to indicate the ISDN switch (PTT)
17
Advertisement
Table of Contents
