Table of Contents
Advertisement
windows after removing. Start
Device Manager
Run "iinclean.exe" located in installation disk to move away files and system
4.
information from Win95.
Reboot the windows to take effect.
5.
Installation for Windows 98 Environment
There are two types of Windows 98 drivers (VxD and WDM) at the installation CD-ROM
diskette. Both of the installation programs can install the ISDN driver, virtual COM port,
and NDISWAN Miniport driver at that same time.
VxD
Windows 98 system includes the NDISWAN Miniport interface, so you do NOT need to
install the ISDN pack (MSISDN11.EXE), and just choose the " isdn98" file from the
" Win98/VxD" subdirectory of installation CD-ROM when Windows 98 detects an ISDN PnP
card and requests to install its driver. The installation program will automatically process the
necessary installation steps for you (including the NDISWAN Miniport driver installation). To
configure the driver and setup application are the same as in above installation for Windows
95 environment section.
WDM
This section describes the installation of ISDN T/A 128
can be used for ISDN Internal cards, USB T/A and T/A.
interfaces including WinISDN, CAPI 2.0, NDISWAN Miniport, and virtual modem in the
Windows 98.
The ISDN T/A 128 WDM driver also supports the multi-ISDN T/A 128
adapters in one PC system.
Installing and Configuring the Drivers
After you insert the ISDN T/A 128 adapter, power the computer switch ON, the Win98
1.
will start up. Then the Windows 98 will automatically detect a new PnP card and
request you to install its driver. Please click " Next" , check " Search for the best driver
for your device" and " Next" . Then insert ISDN T/A 128 driver diskette/CD into the
appropriate disk drive,
(under WDM sub-directory),
necessary installation steps. The ISDN T/A 128 adapter driver, CAPI20 driver, two
virtual COM ports, and NDISWAN Miniport driver will be installed. This ISDN driver will
start automatically without reboot. You can use CAPI20 and virtual COM ports directly.
But you need to go to ControlPanel -> System -> Devicemanager -> Re-flash, then
NDISWAN mini port driver will be activated. Or reboot to enable NDISWAN miniport
driver.
Be noticed, the ISDN pack is included in the Windows 98 as default, so
you do not need to install the ISDN pack again.
à
à
Multi-function adapters
run the ISDNDV98.INF file from the installation diskette/CD
then Windows 98 system will automatically process the
à
Settings
Control Panel
à
ISDN PC Adapter, Remove.
Win98 WDM driver. This driver
24
à
System
The supported application
à
Advertisement
Table of Contents
