Table of Contents
Advertisement
If you have installed the RAS, please refer next step to install ISDN ports for RAS. If
11.
not, please install the RAS now. Please refer figure 3-14, click the services tab to
add RAS. The RAS is provided by Microsoft, you need to prepare the Installation
disks or CD of Windows NT to continually install it. You should jump to next step
when RAS installer asks to add port device.
You will get a window like below. If you do not see the ISDN ports with the device
12.
name of IINWANNT, then click the Add tab to add both IINWANNT devices.
Select the ISDN1 and click Configure tab to set the parameter (Port Usage) to this
13.
ISDN1port for " Dial out only" , " Receive calls only" , or " Dial out and Receive calls"
then click OK.
If you choose " Dial out only" , click OK, and then click the Network tab, you will get a
14.
window like below, check which protocol you want. If you are going to access
Internet, choose " TCP/IP" usually.
33
Advertisement
Table of Contents
