Table of Contents
Advertisement
Select Start à Programs à Accessories à Dial-Up Networking. And then enter the
1.
name of the new Dial-Up account and click " Next >" . Enter the server type details
for your ISP. Click " Next >" and select IINWANNT and click " Next >" . Enter the
phone number of ISP and click " Next" . Click " Finish" . You will get a window like
below.
To configure server settings or dialing properties, click on the " More" button and
2.
select the item you want to change from the pull down list. Click " Dial" to make a
connection with server over ISDN.
Networking, these parameters (phone number, dial using port, server type, and
security) are located in the item " Edit entry and modem properties.." when click on
the " More" button. In the " Security" sub-window, check that you have enabled
" Accept any authentication including clear text" .
If you want to use Multilink PPP connection (128Kbps), please follow the steps
3.
below.
Click " More" button and select the item " Edit entry and modem properties" .
a.
Under the Basic tab, set " Dial using:" to Multiple Lines.
b.
Click Configure and check the check boxes for IINWANNT(ISDN1) and
c.
IINWANNT(ISDN2).
Select IINWANNT(ISDN1), click " Phone numbers" , enter the first phone
d.
number, click Add, and click OK.
Select IINWANNT(ISDN2), click " Phone numbers" , enter the second phone
e.
number, click Add, and click OK.
You are now ready to make 2B connection with server. Please make sure your
f.
ISP or remote server does in fact support 128K MLP and also that it has been
enabled for you by the remote server.
To compare with Windows95 Dial-Up
35
Advertisement
Table of Contents
