Table of Contents
Advertisement
otherwise the analog device connect to the POTS (a/b) port will not be enabled.
SPID-1 and SPID-2.
u
customers, please check with your telephone company if it is necessary.
Now you have finished installation of ISDN T/A 128 adapter, please restart windows.
4.
The ISDN T/A 128 driver will be automatically loaded after started the Windows 3.1, and
the ISDN T/A 128 group folder appears as figure 3-2. The ISDN LOG application is used
to record the handshaking and data transfer process during the communication. It can
be used for debugging purpose so it is often useful to have the log running while first
starting to use the ISDN system. The Line Diagnostic is used for on-line channels test
between ISDN switch and subscriber site, and to get the ISDN line status. Please refer
to chapter 5 for detailed information.
F
You can re-configure the parameters of step 3 by executing ISDN
Configurer in the ISDN T/A 128 group folder. The Configuration dialog
box also displays IO address and IRQ value in the message bar.
Application Environment Setup
SPID parameters only need to be setup for some US
Figure 3-1 ISDN configuration
Figure 3-2 ISDN group folder
9
Advertisement
Table of Contents
