Reconfigure the ISDN Settings
If you want to reconfigure the ISDN settings such as Switch type, Codec and so on,
please click the Network icon in the Control Panel and Adapter tab. Select the " PLANET
ISDN PC Adapter" and click Properties. You will see the Bus Location dialog box,
please click OK. Then the ISDN configuration windows will be shown on the screen, see
figure 3-15.
Removing ISDN T/A 128 for Windows NT
Click the Network Icon in the Control-Panel and Adapters tab. You will get the below
window, and choose " PLANET's ISDN T/A 128 ISDN Driver" , then click Remove.
Installation for Windows 2000 Environment
This section describes the installation of ISDN T/A 128
Win2000 WDM driver. This driver
can be used for ISDN Internal cards, USB T/A and T/A.
The supported application
interfaces including CAPI 2.0 and NDISWAN Miniport in the Windows 2000.
The ISDN T/A
37