Table of Contents
Advertisement
5
.
4
.
2
G
e
n
e
r
a
5
.
4
.
2
G
e
n
e
r
a
General Setup allows you to adjust settings of IP Filter and common options. Here you can
enable or disable the Call Filter or Data Filter. Under some circumstance, your filter set can
be linked to work in a serial manner. So here you assign the Start Filter Set only. Also you
can configure the Log Flag settings, and Accept large incoming fragmented UDP or
ICMP packets.
Click Firewall and click General Setup to open the general setup page.
Call Filter
Data Filter
Action/Profile
APP Enforcement
URL Content Filter
VigorIPPBX 2820 Series User's Guide
l
S
e
t
u
p
l
S
e
t
u
p
Check Enable to activate the Call Filter function. Assign a start
filter set for the Call Filter.
Check Enable to activate the Data Filter function. Assign a start
filter set for the Data Filter.
Select Pass or Block for the packets that do not match with the
filter rules.
Select one of the APP Enforcement Profile settings (created
in CSM>> APP Enforcement Profile) for applying with this
router. Please set at least one profile for choosing in CSM>>
APP Enforcement Profile web page first. For troubleshooting
needs, you can specify to record information for APP
Enforcement Profile by checking the Log box. It will be sent
to Syslog server. Please refer to section System
Maintenance>> Syslog/Mail Alert for more detailed
information.
Select one of the URL Content Filter Profile settings (created
in CSM>> URL Content Filter Profile) for applying with this
router. Please set at least one profile for choosing in CSM>>
URL Content Filter Profile web page first. For
troubleshooting needs, you can specify to record information
for URL Content Filter by checking the Log box. It will be
187
Advertisement
Table of Contents
