Table of Contents
Advertisement
Primary ISP Setup
IP Address Assignment
Method (IPCP) for
primary ISP setup
Secondary ISP Setup)
IP Address Assignment
Method (IPCP) for
secondary ISP setup
configure the PPP session to use the PAP or CHAP
protocols to negotiate the username and password with the
ISP.
Idle Timeout - Idle timeout means the router will be
disconnect after being idle for a preset amount of time.
The default is 180 seconds. If you set the time to 0, the
ISDN connection to the ISP will always remain on.
ISP Name - Enter your ISP name.
Dial Number -Enter the ISDN access number provided by
your ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
In most environments, you should not change these
settings as most ISPs provide a dynamic IP address for the
router when it connects to the ISP. If your ISP provides a
fixed IP address, check Yes and enter the IP address in the
field of Fixed IP Address.
ISP Name - Enter the secondary ISP name.
Dial Number -Enter the ISDN access number provided by
the ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
In most environments, you should not change these
settings as most ISPs provide a dynamic IP address for the
router when it connects to the ISP. If your ISP provides a
fixed IP address, check Yes and enter the IP address in the
field of Fixed IP Address.
266
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
