Table of Contents
Advertisement
Repeater
Access Point Function
Status
5
.
1
3
.
7
A
d
v
a
n
5
.
1
3
.
7
A
d
v
a
n
This page allows users to set advanced settings such as operation mode, channel bandwidth,
guard interval, and aggregation MSDU for wireless data transmission.
Operation Mode
Channel Bandwidth
Guard Interval
VigorIPPBX 2820 Series User's Guide
c
e
d
S
e
t
t
i
n
g
c
e
d
S
e
t
t
i
n
g
MAC addresses are allowed to be entered in this page at
one time. Yet please disable the unused link to get better
performance. If you want to invoke the peer MAC
address, remember to check Enable box in the front of
the MAC address after typing.
If you choose Repeater as the connecting mode, please
type in the peer MAC address in these fields. Four peer
MAC addresses are allowed to be entered in this page at
one time. Similarly, if you want to invoke the peer MAC
address, remember to check Enable box in the front of
the MAC address after typing.
Click Enable to make this router serving as an access
point; click Disable to cancel this function.
It allows user to send "hello" message to peers. Yet, it is
valid only when the peer also supports this function.
Mixed Mode – the router can transmit data with the
ways supported in both 802.11a/b/g and 802.11n
standards. However, the entire wireless transmission
will be slowed down if 802.11g or 802.11b wireless
client is connected.
Green Field – to get the highest throughput, please
choose such mode. Such mode can make the data
transmission happening between 11n systems only. In
addition, it does not have protection mechanism to avoid
the conflict with neighboring devices of 802.11a/b/g.
20 - the router will use 20Mhz for data transmission and
receiving between the AP and the stations.
20/40 – the router will use 20Mhz or 40Mhz for data
transmission and receiving according to the station
capability. Such channel can increase the performance
for data transit.
It is to assure the safety of propagation delays and
reflections for the sensitive digital data. If you choose
auto as guard interval, the AP router will choose short
guard interval (increasing the wireless performance) or
331
Advertisement
Table of Contents
