Table of Contents
Advertisement
If you previously have set up WAN Alias for PPPoE/PPPoA or MPoA mode, you will find
them in Aux. WAN IP for your selection.
Enable
Private IP
Choose PC
VigorIPPBX 2820 Series User's Guide
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of
private IP addresses of all hosts in your LAN network. Select
one private IP address in the list to be the DMZ host.
When you have selected one private IP from the above
dialog, the IP address will be shown on the following screen.
Click OK to save the setting.
179
Advertisement
Table of Contents
