Table of Contents
Advertisement
Activate
Setup Query Server
Setup Test Server
Find more
Set to Factory Default
Cache
VigorIPPBX 2820 Series User's Guide
Click it to access into MyVigor for activating WCF service.
It is recommended for you to use the default setting,
auto-selected. You need to specify a server for categorize
searching when you type URL in browser based on the web
content filter profile.
It is recommendedor you to use the default setting,
auto-selected. By the way, you can click the link of Test a site
to verify whether it is categorized to access into the test server
selected.
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Click this link to retrieve the factory settings.
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 – the router will check the URL that the user wants to access
via WCF. If the URL has been accessed previously, it will be
stored for a short time (about 1 second) in the router to be
accessed quickly if required. Such item can provide accurate
URL matching with faster rate.
L2 – the router will check the URL that the user wants to access
via WCF. If the data has been accessed previously, the IP
addresses of source and destination IDs will be memorized for a
short time (about 1 second) in the router. When the user tries to
access the same destination ID, the router will check it by
comparing the record stored. If it matches, the page will be
retrieved quickly. Such item can provide URL matching with
217
Advertisement
Table of Contents
