Table of Contents
Advertisement
After finishing all the settings here, please click OK to activate them.
P
P
P
o
E
f
o
r
W
A
N
2
P
P
P
o
E
f
o
r
W
A
N
2
To use PPPoE as the accessing protocol of the Internet, select PPPoE mode. The following
web page will appear.
Enable/Disable
ISP Access Setup
ISDN Dial Backup
Setup
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
If you want to connect to Internet all the time, you can check
Always On.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Application – Schedule web page and you can
use the number that you have set in that web page.
This setting is available for the routers supporting ISDN
function only. Before utilizing the ISDN dial backup feature,
you must create a dial backup profile first. Please click ISDN >
Dialing to a Single ISP to create the backup profile.
148
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
