Draytek VigorIPPBX 2820 Series User Manual page 153

PPPoE Pass-through
ISDN Dial Backup
Setup
WAN Connection
Detection
VigorIPPBX 2820 Series User's Guide
Modulation – Default setting is Multimode. Choose the one
that fits the requirement of your router.
The router offers PPPoE dial-up connection. Besides, you also
can establish the PPPoE connection directly from local clients
to your ISP via the Vigor router. When PPPoA protocol is
selected, the PPPoE package transmitted by PC will be
transformed into PPPoA package and sent to WAN server.
Thus, the PC can access Internet through such direction.
For Wired LAN – If you check this box, PCs on the same
network can use another set of PPPoE session (different with
the Host PC) to access into Internet.
For Wireless LAN – If you check this box, PCs on the same
wireless network can use another set of PPPoE session
(different with the Host PC) to access into Internet.
This setting is available for the routers supporting ISDN
function only. Before utilizing the ISDN dial backup feature,
you must create a dial backup profile first. Please click ISDN >
Dialing to a Single ISP to create the backup profile.
Note: This feature is available for ISDN 2 port only.
None - Disable the backup function.
Packet Trigger -The backup line is not on until a packet from
a local host triggers the router to establish a connection.
Always On - If the broadband connection is no longer
available, the backup line will be activated automatically and
always on until the broadband connection is restored. We
recommend you to enable this feature if you host a web server
for your customers' access.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference. TTL
143