Table of Contents
Advertisement
P
P
P
P
P
P
f
f
o
o
r
r
W
W
A
A
N
N
2
2
Such mode is active only 3G USB Modem was chosen as the physical mode in General
Setup.
PPP Client Mode
SIM PIN code
Modem Initial String
APN Name
Modem Dial String
PPP Username
PPP Password
Index (1-15)
Click Enable to activate this mode for WAN2.
Type PIN code of the SIM card that will be used to access
Internet.
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN(Access Point Name) is provided by your ISP for
identifying different access points. Simply click Apply to
apply such name. Finally, you have to click OK to save the
setting.
Apply – Activate the function of identification.
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
Type the PPP username (optional).
Type the PPP password (optional).
Set the PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this filed is blank and the function will always work.
156
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
