Table of Contents
Advertisement
DNS Server IP
Address
P
P
T
P
P
P
T
P
To use PPTP/L2TP as the accessing protocol of the Internet, select PPTP/L2TP mode. The
following web page will appear.
Enable PPTP/Enable
L2TP
Disable
Server Address
Specify Gateway IP
Address
VigorIPPBX 2820 Series User's Guide
/
L
2
T
P
f
o
r
W
A
N
2
/
L
2
T
P
f
o
r
W
A
N
2
Domain Name: Type in the domain name that you have
assigned.
Specify an IP address – Click this radio button to specify
some data if you want to use Static IP mode.
IP Address: Type the IP address.
Subnet Mask: Type the subnet mask.
Gateway IP Address: Type the gateway IP address.
Default MAC Address: Click this radio button to use default
MAC address for the router.
Specify a MAC Address: Some Cable service providers specify
a specific MAC address for access authentication. In such
cases you need to click the Specify a MAC Address and enter
the MAC address in the MAC Address field.
Type in the primary IP address for the router if you want to use
Static IP mode. If necessary, type in secondary IP address for
necessity in the future.
Click Enable PPTP/Enable L2TP for activating this function.
If you click Disable, this function will be closed and all the
settings that you adjusted in this page will be invalid.
Specify the IP address of the PPTP/L2TP server.
Specify the gateway IP address for the server.
153
Advertisement
Table of Contents
