5
.
1
1
.
3
D
i
a
l
t
o
S
i
n
5
.
1
1
.
3
D
i
a
l
t
o
S
i
n
Select Dialing to a Single ISP if you access the Internet via a single ISP.
ISP Access Setup
PPP/MP Setup
g
l
e
I
S
P
g
l
e
I
S
P
ISP Name - Enter your ISP name such as Seednet, Hinet
and so on.
Dial Number -Enter the ISDN access number provided by
your ISP.
Username - Enter the username provided by your ISP.
Password - Enter the password provided by your ISP.
Require ISP Callback (CBCP) -If your ISP supports the
callback function, check this box to activate the Callback
Control Protocol during the PPP negotiation.
Scheduler (1-15) - Enter the index of schedule profiles to
control the Internet access according to the preconfigured
schedules. Refer to section Applications>> Schedule for
detailed configuration.
Link Type
for different purpose.
dial-out function. Dialup 64Kbps allows you to use one
ISDN B channel for Internet access. Dialup 128Kbps
allows you to use both ISDN B channels for Internet
access. Dialup BOD stands for bandwidth-on-demand.
The router will use only one B channel in low traffic
situations. Once the single B channel bandwidth is fully
used, the other B channel will be activated automatically
through the dialup. For more detailed BOD parameter
settings, please refer to the section of Call Control.
PPP Authentication - PAP only allows you to configure
the PPP session to use the PAP protocol to negotiate the
username and password with the ISP. PAP or CHAP is to
configure the PPP session to use the PAP or CHAP
protocols to negotiate the username and password with the
ISP.
Idle Timeout - Idle timeout means the router will be
There are three link types provided here
–
Link Disable disables the ISDN
264
VigorIPPBX 2820 Series User's Guide