Table of Contents
Advertisement
Fragments
Filter
Branch to other Filter
Set
APP Enforcement
Type.
Protocol - Specify the protocol(s) which this filter rule will
apply to.
Source/Destination Port -
(=) – when the first and last value are the same, it indicates one
port; when the first and last values are different, it indicates a
range for the port and available for this service type.
(!=) – when the first and last value are the same,
all the ports except the port defined here; when the first
and
last values are different, it indicates that all the ports
except the range defined here are available for this service
type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this
profile.
Service Group/Object - Use the drop down list to choose the
one that you want.
Specify the action for fragmented packets. And it is used for
Data Filter only.
Don't care -No action will be taken towards fragmented
packets.
Unfragmented -Apply the rule to unfragmented packets.
Fragmented - Apply the rule to fragmented packets.
Too Short - Apply the rule only to packets that are too short to
contain a complete header.
Specifies the action to be taken when packets match the rule.
Block Immediately - Packets matching the rule will be
dropped immediately.
Pass Immediately - Packets matching the rule will be passed
immediately.
Block If No Further Match - A packet matching the rule, and
that does not match further rules, will be dropped.
Pass If No Further Match - A packet matching the rule, and
that does not match further rules, will be passed through.
If the packet matches the filter rule, the next filter rule will
branch to the specified filter set. Select next filter rule to
branch from the drop-down menu. Be aware that the router will
apply the specified filter rule for ever and will not return to
previous filter rule any more.
Select one of the APP Enforcement Profile settings (created
in CSM>> APP Enforcement Profile) for applying with this
router. Please set at least one profile for choosing in CSM>>
192
it indicates
VigorIPPBX 2820 Series User's Guide
Advertisement
Table of Contents
