Enrolling Keyfob Transmitters - Visonic PowerMax User Manual

(See figure 8)
SET TIME&FORMAT
NEXT
SCHEDULER
OK
NEXT
SET DATE&FORMAT
SUNDAY MONDAY
NEXT
OK OK
OPERATION No. 1
NEXT
Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.

Enrolling Keyfob Transmitters

Keyfob transmitters are multi-button wireless units of
the CodeSecure™ type. Eight system users carry
keyfob transmitters to exercise better, quicker and
safer system functions control. Your control panel
must recognize the unique identification code (ID) of
each such keyfob to respond to commands
transmitted by them.
Note: For UL installations where the model MCT-
234 keyfob is used, the voice/speaker on the
PowerMax+ shall be enabled.
Before anything else, gather up all keyfob units you
intend to enroll, and make sure they all have
batteries installed.
Keyfob transmitter enrolling involves the following
steps:
A. Having entered
successfully (see above - Entering the User
Settings Menu),
(repeatedly, if necessary) until the display will
read:
ENROLL KEYFOB
B. Click <OK>. The display will read:
KEYFOB No:
C. Suppose that the Keyfob you are about to enroll
is to be designated as Keyfob No. 5. Assuming
that memory location No. 5 is free - no keyfob has
yet been enrolled to it - click the <5> key. The
display will change to:
KEYFOB No:
DE5467U
DEVICE No.
regarding 2-way X-10 unit
device number (2-digit)
OK
press OK, PGM is displayed
TUESDAY WEDNESDAY
NEXT NEXT
OK
OPERATION No. 2
NEXT
OK OK
Figure 8 DETAIL "A" - Scheduler Function
your Master User
Click the NEXT
_
5
Black box is displayed
If you enter "00" and
THURSDAY
NEXT NEXT
OK OK
OPERATION No. 3
NEXT
OK
start - HH:MM
stop - HH:MM
or
BACK
NEXT
OK
TIME - - / - -
(enter start/stop time)
OK
OK
The clear space at the far right tells you that the
memory location is free.
D. Click <OK>. The display will prompt you to initiate
a transmission from the chosen keyfob:
E. Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response,
the "Happy Tune" (- - - –––) will sound and the
display will change to:
A dark box will appear at the far right, indicating
that the chosen Keyfob has been enrolled as
Keyfob No. 5.
Note: If the same keyfob is already enrolled
elsewhere, the "Happy Tune" will sound twice in
succession.
Code
F. From this point on, you may continue in several
different directions:
button
•
If you wish to enroll another keyfob, select
the desired number by:
-
-
-
•
To return to the main menu, click <AWAY>.
This will bring back the display:
You may now review and select any other mode on
the User menu (by clicking <NEXT> or <BACK>).
USER SETTINGS
FRIDAY SATURDAY
NEXT
OK OK
OPERATION No. 4
NEXT
OK
TRANSMIT NOW
KEYFOB No: 5
Clicking <NEXT> to go up (6 7 8.....)
Clicking <BACK> to go down (4 3 2.....)
Clicking <HOME> <keyfob #>.
<OK> TO EXIT
DAILY
NEXT NEXT
OK
To move within most of
the menus, the following
keys can be used:
NEXT
Moving forward
SHOW / OK Show / confirm
data
Moving backward
Moving one level
up in the menu
Return to
"<OK> TO EXIT"
-
27