Screen Saver Option - Visonic PowerMax User Manual

Control panel
Note regarding the Mute Speaker button
The Mute Speaker button is active only if the "Set Voice Option" function is enabled ("enable prompts" - see
user setting flow-chart, fig. 8).

Screen Saver Option

The Screen Saver option (if enabled by the installer)
causes that when no key is pressed during more
than 30 seconds, the display is "PowerMax" and the
LEDs do not light (to prevent an intruder to know the
system status). The normal display returns after
pressing the OFF button followed by entering user
code (Refresh by Code) or after pressing any key
(Refresh by Key), as selected by the installer.
DE5467U
ARM
INDICATOR
TROUBLE
INDICATOR
CHIME
INDICATOR
POWER
INDICATOR
RECORD MESSAGE
VOLUME UP /
LIGHT BRIGHT
PLAY MESSAGE
VOLUME DOWN /
LIGHT DIM
CHIME ON/OFF
MUTE SPEAKER
NO ENTRY DELAY
EVENT LOG
EMERGENCY
(Hold for 2 sec.)
Press both buttons
for panic alarm
Figure 4. Controls and Indicators
If Refresh by Key was selected, the first pressing of
any key (except Fire and Emergency) causes normal
display return and the second press performs the key
function. Regarding the Fire and Emergency keys,
the first key press causes normal display return and
also performs the Fire/Emergency function.
INTRODUCTION
LCD
WINDOW
"SHOW / OK"
"NEXT"
BUTTON
BUTTON
LIGHT ON
FIRE
(Hold for 2 sec.)
ARMING
"AWAY"
LIGHT OFF
ARMING "HOME"
LIGHT CONTROL
DISARMING
TESTING
RETRACK
7