Introduction; Overview - Visonic PowerMax User Manual

Fully supervised wireless alarm control system
Hide thumbs Also See for PowerMax:
Table of Contents

Advertisement

INTRODUCTION

1. INTRODUCTION

Overview

The PowerMax+ is a wireless alarm control system
that provides protection against burglary, fire and
tampering. In addition, it can be used to control lights
and electrical appliances within your household
and/or to monitor the activity of disabled or elderly
people left at home. Status information is presented
visually and verbally, and in most cases a recorded
voice prompts you to take correct action.
The PowerMax+ is governed by a control panel
(Figure 1) designed to collect data from various
sensors that are strategically located within and
along the perimeter of the protected site (Figure 2).
In the disarmed state, the system provides you with
visual and verbal status information, and initiates an
alarm if smoke is detected or upon disturbance in a
24-hour zone (a zone which is active 24-hours a day).
In the armed state, the system initiates an alarm
upon detection of disturbance in any one of the
armed zones.
EMERGENCY
PENDANT
TRANSMITTERS
DOOR OR
WINDOW
OPEN/CLOSE
DETECTOR
UNIVERSAL
PERIMETER
PROTECTION
DETECTOR
WIRELESS
SMOKE
DETECTORS
DETECTOR
(UP TO 28 UNITS)
INSTALLED IN
THE PROTECTED
PREMISES
MOTION
DETECTOR
FLOOD
DETECTOR
GAS
DETECTOR
UP TO 2
HARD WIRED
DETECTORS
4
15 ELECTRICAL APPLIANCES (CONTROLLED VIA EXISTING ELECTRICAL CABLING).
ON/OFF BY VARIOUS FACTORS AS PROGRAMMED BY THE INSTALLER
Shutter
X-10 #1
X-10 #2
INTERNET
LOCAL
COMPUTER
(OPTION)
POWERLINK
WIRELESS REMOTE
KEYFOB TRANSMITTER
UP TO 8 KEYFOB TRANSMITTERS AS WELL AS UP TO 8 WIRELESS REMOTE COMMANDERS
(USER 1 - USER 8) DISTRIBUTED TO USERS OF THE SYSTEM AND TWO 2-WAY KEYPADS
Figure 2. Typical System Configuration
You will need a 4-digit security code to master the
system, and you can authorize 7 other persons to
use the system by providing them with their own
security codes. Moreover, you can obtain up to 8
multi-function key-ring transmitters that will allow you
and other users to control major functions without
approaching the control panel.
LUMINOUS
INDICATORS
MICROPHONE
BUILT-IN
SIREN
BATTERY
COMPARTMENT
COVER (CLOSED)
Figure 1. Control Panel with Covers Closed
Air conditioner
Radio
TV
X-10 #3
X-10 #4
X-10 #5
X-10 #6
EXISTING ELECTRICAL
CABLING IN WALLS
POWERLINE
INTERFACE
MODULE
TEL. LINE
INTERNAL
SIREN OR
STROBE
PGM OUTPUT
FOR CONTROLLING
DEVICES BY
VARIOUS FACTORS
AS PROGRAMMED
BY THE INSTALLER
2-WAY KEYPAD
COMMANDER
DISPLAY
CONTROL
KEYS
GSM UNIT
GSM
X-10 #15
TELEPHONE
EXCHANGE
PAGER
COMPANY
COMPUTER
WIRELESS
SIREN
OR
EXTERNAL
SIREN
4 PRIVATE
TELE-
PHONES
PUBLIC
TELEPHONE
EXCHANGE
CENTRAL MONITORING STATIONS
KEYPAD
COVER
(CLOSED)
TEL
CENTRAL
MONITORING
STATION
PAGER
DE5467U

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents