Switching From 'Away' To 'Home; Arming 'Instant; Forced Arming - Visonic PowerMax User Manual

Switching from 'AWAY' to 'HOME'

Do not disarm the system - just press
this operation reduces the security level, the
PowerMax+ will ask you to key in your master user
code or user code, thus making sure that you are an
authorized user.
PRESS RESULTANT DISPLAY
ENTER CODE
ARMING HOME
[Enter code]
Move to
interior zone
ARM HOME
ARM indicator flashes during the armed state.
If an alarm occurred while the system was armed in
the AWAY mode, the display will respond differently:
PRESS RESULTANT DISPLAY
ENTER CODE
ARMING HOME
[Enter code]
Move to
interior zone
HOME
ARM HOME MEMORY
ARM flashes during the armed state.

Arming 'Instant'

You may arm AWAY or HOME without an entry
delay - any detection in any zone will trigger an
immediate alarm.
If you wish to arm AWAY-INSTANT, proceed as
follows.
PRESS RESULTANT DISPLAY
ARMING AWAY
ARMING INSTANT
PLEASE EXIT NOW
Vacate the
premises
AWAY
ARM lights during the armed state.
DE5467U
SECURING THE PROTECTED SITE
. Since
_ _ _
↓ (Exit delay) ↓
HH:HH
_ _ _
↓ (Exit delay) ↓
HH:HH
(alternating)
(alternating)
↓ (Exit delay) ↓
If you wish to arm HOME-INSTANT, proceed as follows:
PRESS RESULTANT DISPLAY
ARMING HOME
ARMING INSTANT
ARMING HOME
Go to an
internal zone
ARM HOME
ARM HOME INSTANT
ARM indicator flashes during the armed state.

Forced Arming

(Not to be used in UL- listed systems)
Forced arming allows you to arm the system even
though one zone or several zones are disturbed, and
the NOT READY message is displayed.
Automatic forced arming only works if the installer
allowed this option while programming your system.
Disturbed zones will be bypassed - they will not be
armed. The protected site will not have maximum
protection.
Note: When forced arming is carried out, the buzzer
"protests" by emitting a continuous tone during the exit
delay until the last 10 seconds of the delay. You can
silence this signal by pressing the arming button again.
When NOT READY is displayed, Forced arming
"AWAY" is performed as follows:
PRESS RESULTANT DISPLAY
ARMING AWAY
PLEASE EXIT NOW
(to
mute the
AWAY
buzzer)
ARM lights during the armed state.
When NOT READY is displayed, Forced arming
"HOME" is performed as follows:
PRESS RESULTANT DISPLAY
ARMING HOME
(To
mute the buzzer)
Go to an interior
HOME
zone
ARM indicator flashes during the armed state.
(alternating)
↓ (Exit delay) ↓
HH:HH
(alternating)
↓
↓ ↓
(Exit delay)
↓ (Exit delay) ↓
HH:HH
9