Enrolling Keyfob Transmitters - Visonic PowerMax Complete User Manual

(See figure 8)
SET DATE&FORMAT
SCHEDULER
SUNDAY MONDAY
OPERATION No. 1
Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.

Enrolling Keyfob Transmitters

Keyfob transmitters are multi-button wireless units of
the CodeSecure™ type with up to 16 million ID
codes combinations. Eight system users carry keyfob
transmitters to exercise better, quicker and safer
system functions control. Your control panel must
recognize the unique identification code (ID) of each
such keyfob to respond to commands transmitted by
them.
Before anything else, gather up all keyfob units you
intend to enroll, and make sure they all have
batteries installed.
Keyfob transmitter enrolling involves the following
steps:
A. Having entered
successfully (see above - Entering the User
Settings Menu), Click the
(repeatedly, if necessary) until the display will
read:
ENROLL KEYFOB
B. Click
KEYFOB No:
C. Suppose that the Keyfob you are about to enroll
is to be designated as Keyfob No. 5. Assuming
that memory location No. 5 is free - no keyfob has
yet been enrolled to it - click the <5> key. The
display will change to:
KEYFOB No:
The clear space at the far right tells you that the
memory location is free.
D-302213
DEVICE No.
device number (2-digit)
TUESDAY WEDNESDAY
OPERATION No. 2
Figure 8 DETAIL "A" - Scheduler Function
your Master User
. The display will read:
_
5
Black box is displayed
regarding 2-way X-10 unit
If you enter "00" and
press OK, PGM is displayed
THURSDAY
OPERATION No. 3
start - HH:MM
stop - HH:MM
or
TIME - - / - -
(enter start/stop time)
D. Click
to initiate a transmission from the chosen keyfob:
E. Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response,
the "Happy Tune" (- - - –––) will sound and the
display will change to:
Proceed to step "J" below.
For enabled partitioning mode, the display will be:
F. Click
G. Select the next partition by pressing
Code
The display will be:
button
H. Click
I. Click
A dark box will appear at the far right, indicating
that the chosen Keyfob has been enrolled as
Keyfob No. 5.
J. From this point on, you may continue in several
different directions:
•
If you wish to enroll another keyfob, select
the desired number by:
- Clicking
- Clicking
USER SETTINGS
FRIDAY SATURDAY
OPERATION No. 4
To move within most of
the menus, the following
keys can be used:
Moving forward
Show / confirm
data
Moving backward
Moving one level
up in the menu
Return to
"<OK> TO EXIT"
. The display will prompt you
TRANSMIT NOW
KEYFOB No: 5
F05: PARTITION
. The display will be:
PARTITION 1
PARTITION 2
. The display will be:
PARTITION 2
. The display will be:
KEYFOB No: 5
-
to go up (6 7 8.....)
to go down (4 3 2.....)
DAILY
.
29