This chapter provides technical reference information for the following
Express5800/320Ma 3.2 GHz, 3.6 GHz, and Dual-Core system features:
•
Configuring an
•
Managing
•
ftServer Manager
•
A detailed description of the
Administering an ftGateway Group Manually
Normally, you use the ActiveService Manager to configure a system's relationship to
an ftGateway group. This ensures that NEC Technical Support database will match the
configuration of your Express5800/320Ma's ftGateway. See the Express5800/320Ma
ActiveService Network Configuration Guide for information about configuring ASN
connectivity using an ftGateway Group.
However, under certain circumstances, you may be asked by NEC Technical Support
or your service representative to administer an ftGateway group manually. Refer to the
information in this section to administer an ftGateway group manually.
Table 2-1
describes the four actions associated with the ftGateway Group node.
Table 2-1. ftSMC System Inventory Component Actions
Action
Create ftGateway
Group
Join ftGateway
Group
Leave ftGateway
Group
Remove ftGateway
Group
Express5800/320Ma System Features
ftGateway group
mean time between failures (MTBF) statistics
event handling
ASN connection retry cycle
Description
Creates a new ftGateway group using a customer-supplied name for the
group.
Adds a slave system to an existing ftGateway group.
Removes a slave system from an ftGateway group.
Removes an ftGateway group. You must remove all slave systems from the
group prior to executing this action.
manually
Express5800/320Ma System Features
Chapter 2
2-
2-1