NEC Express5800/320Ma Technical Reference Manual page 31

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
EccMinutesToComplete
EccThreshold
Enable Bringup
Enabled
Encrypt Http Over Internet
Encrypt Ignoring Unknown CA
EventMessageBufferEnabled
EventMessageBufferFullInterr
uptEnabled
FirmwareRevision
ftGateway Group ID
ftGateway Group Name
ftGateway IP Addresses[1]
ftGateway IP Addresses[2]
ftGateway Password
Express5800/320Ma Release
Express5800/320Ma Version
Description
Sets the time, in minutes, to complete a single check (read followed
by write if an error is detected) of all memory. The valid range is 10
to 10,080 minutes (7 days), and the default is 1440 minutes (1 day).
Sets the threshold number of errors that sends an ECC call-home
message. The range is 19 to 512 errors, and the default is 128.
Returns a CPU element to automatic return-to-service mode.
If True, NEC Technical Support or your service representative
designated by this ASN is allowed to dial in, and the ASN
referenced in the ASN For Call-home
home. Valid values are True (enabled) or False (disabled). The
default is False (disabled).
If enabled, encrypts data when sending an alarm over the Internet.
Disabled by default. Valid values are True (enabled) or False
(disabled).
Indicates whether the system should accept an SSL certificate that
was issued by an untrusted certificate authority's root certificate. If
true, accepts unknown CA when sending an encrypted alarm over
the internet.
Enables (True) or disables (False) the event message buffer.
Enables (True) or disables (False) the event message buffer full
interrupt.
Displays the firmware revision of the BMC.
Defines a particular ftGateway group.
The customer-supplied name of an ftGateway group.
Specifies one of two network IP addresses that the gateway
machine uses to communicate with other members of the ftGateway
group.
Specifies one of two network IP addresses that the gateway
machine uses to communicate with other members of the ftGateway
group.
The customer-specified password required for communications
between ftGateway group members.
The Express5800/320Ma System Software release number.
The Express5800/320Ma System Software version designation.
ftSMC Component Properties and Actions
ftSMC Component Properties
property is allowed to call
3-7