NEC Express5800/320Ma Technical Reference Manual page 39

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
Op State: Reason
Bringup Failed
Op State: Reason
Parent Broken
Op State: Reason
Media Disconnect
Op State: Reason
Firmware Burn Fail
Op State: Reason
Firmware file not found
Op State: Reason
Firmware file error
Op State: Reason
Firmware PROM error
Op State: Reason
Autoburn Disabled
Op State: Reason
Primary
Op State: Reason
Secondary
Op State: Reason
Parent Empty
Op State: State
Op State: State
Broken
Op State: State
Dumping
Op State: State
Diagnostics
Op State: State
Diagnostics passed
Description
The driver did not bring the element online.
Parent device of this device is broken (for example, the parent I/O
element for this adapter is broken).
Simplex state was entered because a cable was unplugged.
Failed to update the BIOS.
The entered firmware file path is either incorrect or the file does not
exist.
Could not read the firmware file.
Could not write to the firmware file.
Cannot match a new element's BIOS with that of the existing
element. See AutoBurnEnabled
With duplex devices, this indicates that the specific device is primary
in the pair.
With duplex devices, this indicates that the specific device is
secondary in the pair.
The device above this device in the hierarchy is not present or does
not have power.
Operational state of a component.
A component has a problem; an associated reason (see Op State:
Reason) describes the problem. This is a terminal state; some user
action must occur to change this state. User actions that cause a
transition out of the Broken state include the
Initiate BringDown actions, and removing the component. Both of
these actions are described in
A CPU element is recovering crash dump information.
A component is running diagnostics.
A component has passed diagnostics.
ftSMC Component Properties and Actions
ftSMC Component Properties
in this table.
Initiate BringUp
Table 3-2.
and
3-15