Restoring Default Values Feature; Ftserver Setup Menus - NEC Express5800/320Ma Technical Reference Manual

Restoring Default Values Feature

During system boot, ftServer Setup tries to load the values saved in CMOS RAM. If
those values are incorrect and cause the system boot to fail, you should reboot and
press F2 to enter ftServer Setup. There, you can attempt to change the values that
caused the failure, if they are known, or you can reset the default values. Use the Load
Setup Defaults option under the Exit menu to reset the default values. See the
menu for details.

ftServer Setup Menus

The ftServer Setup utility for systems includes the following menus and submenus:
•
Main Menu
•
Advanced Menu
– Advanced Processor Configuration Submenu
– I/O Device Configuration Submenu
– PCI Configuration Submenu
– Console Redirection Submenu
– Monitoring Configuration Submenu
•
Security Menu
•
Boot Menu
•
Exit Menu
Restoring Default Values Feature
BIOS Setup
Exit
5-5