NEC Express5800/320Ma Technical Reference Manual page 16

Administering an ftGateway Group Manually
To create a new ftGateway group
1. Access the system that is to be the gateway system. Start ftSMC.
2. In ftSMC, double-click the ftServer Configuration node to expand the child nodes
beneath it.
3. Right-click the ActiveService Network icon and click Create ftGateway Group.
4. In the Create ftGateway Group on ActiveService Network dialog box, type the
name you want to give the ftGateway group in the Group Name box.
5. In the Create ftGateway Group on ActiveService Network dialog box, type the
password you want to use to access the ftGateway group in the Group Password
box. Click Finish.
To add a slave system to an ftGateway group
1. Access the slave system that you want to add to the ftGateway group. Start ftSMC.
2. In ftSMC, double-click the ftServer Configuration node to expand the child nodes
beneath it.
3. Right-click the ActiveService Network icon, and click Join ftGateway Group.
4. In the Join ftGateway Group on ActiveService Network dialog box, type the
name of the ftGateway group that you are joining in the Group Name box.
5. In the Join ftGateway Group on ActiveService Network dialog box, type the
ftGateway group password in the Group Password box.
6. In the Join ftGateway Group on ActiveService Network dialog box, type the
value of the gateway machine's ftGateway IP Addresses[1] property in the
Gateway IP Address 1 box.
7. In the Join ftGateway Group on ActiveService Network dialog box, type the
value of the gateway machine's ftGateway IP Addresses[2] property in the
Gateway IP Address 2 box.
8. Click Finish.
To remove a slave system from an ftGateway group
1. Access the slave system that you want to remove from the ftGateway group. Start
ftSMC.
2. In ftSMC, double-click the ftServer Configuration node to expand the child nodes
beneath it.
3. Right-click the ActiveService Network icon and click Leave ftGateway Group.
2-2 Express5800/320Ma: Technical Reference Guide