NEC Express5800/320Ma Technical Reference Manual page 90

Index
Reset Device Properties, 3-25
Reset Driver Properties, 3-25
restoring default BIOS settings, 5-22
Resynchronize This Physical Disk From RDR
Virtual Disk, 3-26
RevisionID, 3-19
RPC provider service, 1-4
S
SATA disk driver, srasata.sys, 1-3
Save WMI Recovery Information, 3-26
Schedule CPU BringUp Options, 3-26
Send Inventory Report, 3-26
services
alarm, 1-3
eService, 1-3
inventory, 1-3
Maintenance and Diagnostics, 1-3
policy, 1-4
provider manager, 1-4
RAS, 1-4
RPC provider, 1-4
software availability manager, 1-4
Sra_sysmgtSetup.exe, 1-4
srasvc.exe -group local, 1-4
SSN, 1-4
storage manager, 1-4
system, 1-3
Set as Active ASN, 3-26
Set As Active RDR Plex, 3-26
Set Cache Flush Interval, 3-26
Set MTBF Faultcount Limit, 3-26
Set MTBF Threshold, 2-6, 3-26
Set MTBF Type
CPU board, 3-26
Set Primary, 3-26
Set Priority, 3-26
Set Rdr Lun Load Balancing, 3-27
Set Resync Priority, 3-27
Site Heartbeat Granularity, 3-19
Site Heartbeat Interval, 3-19
Site Heartbeat Next Due, 3-20
Site Heartbeat Time Due, 3-20
SMM Admin Dialback Number, 3-20
SMM Admin Enable Email, 3-20
SMM Admin ID, 3-20
SMM Admin Password, 3-20
SMM ASN Hub ID, 3-20
Index-4 Express5800/320Ma: Technical Reference Guide
SMM ASN Hub Password, 3-20
SMTP Forwarding, 3-20
SMTP Server Enabled, 3-20
SMTP Server IP, 3-20
SMTP Server IP 1-7, 3-20
SMTP Server Port, 3-20
SNMP Community, 3-20
SNMP traps, 4-3
soft errors, 2-4
software availability manager service, 1-4
SSN service, 1-4
Start Slot Identification, 3-27
Stop Slot Identification, 3-27
Stop Verify, 3-27
storage manager service, 1-4
SubNetMask, 3-21
SubsystemID, 3-21
SubSystemVendorID, 3-21
SummaryScreen, 3-21
Synchronize SEL date and time with
System, 3-27
Sysmgt Startup service, 1-4
System ID Prom entries, 3-21
T
thresholds
changing MTBF, 2-6
Time of Last Fault, 3-22
U
Update BMC Firmware, 3-27
Update Firmware, 3-27
Update ID PROM, 3-27
CPU board, 3-27
Update Network Settings, 3-27
V
Value, 3-23
VendorID, 3-23
Verify RDR Virtual Disk, 3-27