NEC Express5800/320Ma Technical Reference Manual page 37

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
NegativeGoingHysteris
NormalResynchPriorityMbs
Notify Email Address
Notify Final Delay
Notify Initial Delay
Notify Pager Number
Notify Proxy Bypass
Notify Proxy Server
Notify Send Old Messages
Notify SMTP Auth Mode
Notify SMTP Password
Notify SMTP Server
Notify SMTP User Name
Description
A value added to a reading to determine if a threshold event has
cleared. A value of 0 means that the event clears after the reading
drops to one less than High Warning or Critical Threshold.
The middle value for I/O bandwidth to disk, a portion of which will be
used for RDR disk resynchronization operation. The default value of
this property is 20Mbps.
The customer email address or addresses to send an email to when
an alarm occurs (for example, administrator@company.com). Use a
semicolon to separate multiple addresses (for example,
admin1@company.com;admin2@company.com). The length of all
addresses and their separators in this field must be less than 300
characters.
The amount of time, in minutes, for the User Notification processes
to wait after sending email, before sending another one, to allow for
multiple alarms to be aggregated and sent at the same time. The
default is 10 minutes.
The amount of time, in minutes, for the User Notification processes
to wait before sending email in order to allow for multiple alarms to
be sent at the same time. The default is 1 minute.
The customer pager number to send a page to when an alarm
occurs.
If the proxy server can be bypassed for local addresses, set this to
"local"; otherwise, leave blank.
The server and port name of the customer proxy server in the
format server:port (for example, proxy.customer.com:1234).
If True, send any unsent messages at startup. If False, delete any
previously unsent messages.
Authentication mode for the customer SMTP server. Can be either
Anonymous (no authentication required) or Basic (need to supply a
user name and password).
The password for authentication with the customer SMTP server.
Used only if Notify SMTP Auth Mode
SMTP server to use to notify a customer by email of alarm
conditions (for example, mailhub.company.com).
The user name for authentication with the customer SMTP server.
Used only if Notify SMTP Auth Mode
ftSMC Component Properties and Actions
ftSMC Component Properties
is set to Basic.
is set to Basic.
3-13