NEC Express5800/320Ma Technical Reference Manual page 41

Hide thumbs Also See for Express5800/320Ma:
Table of Contents

Advertisement

Table 3-1. ftSMC System Inventory Component Properties (Continued)
Property
OsBootTime
Owner
Pager Final Delay
Pager Initial Delay
PartNumber
Partner: DevicePath
Partner: PartnerCount
Partners
PCI ASIC
PCIEnumerationTime
PCIFunctionNumber
Phone Numbers
Description
Specifies the maximum time that OS boot process processing can
take before the system is considered hung.
Indicates the owner of the modem.
The amount of time, in minutes, for the Alarm Service to wait after
sending a page, before sending another one. This allows one page
to be sent for multiple alarms occurring in a timespan. The default is
10 minutes.
The amount of time, in minutes, for the Alarm Service to wait after
sending a page, before sending another one, to allow for multiple
alarms to be aggregated and sent at the same time.
The VTM adapter part number.
Device identifier that locates the component that is the partner of
this component if this component is operating in fault-tolerant mode
and
Partner: PartnerCount
Number of components of this type that are operating in a
fault-tolerant mode: simplex (0), or duplex or DMR (1). Ethernet
adapters must be partnered. A maximum of two adapters can be
partnered by the Port Duplex driver.
Specifies the number of partner components a component has
when operating in a fault-tolerant mode: simplex (0) or duplex (1).
For example, a CPU element with one partner will have a value of
Partners[1].
A set of properties (BusNumber, DeviceNumber, LogicRevision,
Version) that provide information about the PCI ASIC in the I/O
element.
Specifies the maximum time that PCI enumeration can take before
the system is considered hung.
Function's PCI function number.
Telephone numbers of NEC Technical Support or your service
representative. The numbers can be from 10 to 120 characters long
and they are in text-character format (for example, 9785551234).
When attempting to connect to the ASN, a system dials each phone
number the number of times defined by
ftSMC Component Properties and Actions
ftSMC Component Properties
is not 0. See DevicePathID.
Number of
Retries.
3-17

Advertisement

Table of Contents
loading

Table of Contents